Anycubic 355-410nm Green Eco-resin - 500ml

Anycubic green eco-resin is a plant-based 3D printing material tailored to LCD light source. It is a biodegradable UV-sensitive photopolymer made from soybean oil. Both eco-friendly and user-friendly, it emits an ultra-low odor you can barely smell. Also, it isn’t toxic. This means anyone can use it either at home or in the office.

With a low shrinkage rate and quick curing time, green eco-resin prints beautifully. It reproduces sharp details and clean surfaces with high-precision. The light green color finish is vivid and bright. Sensitive to a wavelength range of 355 to 410nm, you can use it on the most popular LCD/DLP 3D printers, including the own-brand Photon and Photon S resin printers.

Anycubic green eco-resin comes in 500ml packs. It is used to produce a variety of models, including dental devices, jewelry, daily objects, architectural models, and others. Continue reading our complete review.

First time printing with the Anycubic green Eco-resin, here is what a user got. The print turned out well.

Credit: @u/callsignsaru / Reddit

Specifications

Anycubic green eco-resin

Anycubic 355-410nm green eco-resin can be exposed to a wavelength range from 355 to 410nm. The bottom layer exposure should range between 60 and 80 seconds. The normal curing time ranges from 8 to 10s. After printing a part, you should wash it in alcohol for at least 30 seconds. 

The plant-based resin comes in a 500ml bottle, which should always be shaken before use. It lasts up to 12 months if properly stored in a sealed container away from direct light.

Technical specs

• Hardness: 84D
• Viscosity: 150-300 MPa*s (25°C)
• Shrinkage: 3.72-4.24%
• Solid Density: 1.184 g/cm3
• Bending strength: 59-70 MPa
• Extension Strength: 36-52 MPa
• Vitrification Temp: 100°C
• Thermal Deformation: 80°C
• Elongation at Break: 11%-20%
• Thermal Expansion: 95*E-6

Color specs

• Color name: Green 
• Color attribute: Solid
• Net Weight: 500ml