eSUN 1.75mm Copper eSilk PLA filament - 3kg

eSUN copper eSilk PLA filament is a 3D printing material produced by eSUN. It is a modified version of the standard PLA. Compared to the original formulation, it contains a bright-effect, polyester-like additive that gives the material a silky and shiny finish.

Like its precursor, the environmentally-friendly eSilk PLA is easy to extrude and non-toxic. It features higher mechanical properties and toughness. The polyester additives make for better layer adhesion. Thanks to its low glass transition temperature, it features a low shrinkage rate. The good round shape and the precise, uniform diameter of 1.75mm reduce the risk of jams or clogging.

The high-gloss eSUN copper eSilk PLA filament is ideal for producing objects with a soft-touch, smooth and glossy finish. It preserves almost the same color before and after printing. It can be used to create home decorations, art pieces, fashion accessories, and more. You can print it on any FDM 3D printer without the need for a heated bed. eSUN copper eSilk PLA ships in 3kg filament spools. With a shiny and silky appearance, the printed parts look amazing.

Look at the gold and copper models below pictured. The glossy surfaces generate an intriguing play of light and shadow.

Specifications

eSUN copper eSilk PLA technical data

• Printing temperature: 190-220 °C
• Heated bed temperature: Not required / 60 - 80°C recommended
• Filament density: 1.24 g/cm³ 
• Heat Distortion Temperature (0.45MPa): 56 °C 
• Melt Flow Index: 5 g/10min (190°C/2.16KG）
• Tensile Strength: 65 MPa
• Elongation at Break: 8%
• Flexural Strength: 97 MPa
• Flexural Modulus: 3,600 MPa
• IZOD Impact Strength: 4 KJ/㎡

Spool specs

• Filament diameter: 1.75mm
• Dimensional Accuracy: ±0.02mm
• Spool weight: 3kg
• Color name: Copper
• Color attribute: Silky

The eSUN copper eSilk PLA filament is supplied in 3kg filament spools. Each spool is packed into a vacuum bag, which protects the filament from dust while keeping it dry.