eSUN 3mm (2.85mm) Yellow HIPS filament - 1kg

eSUN yellow HIPS filament is a soluble 3D printing material used to produce support structures and standalone products alike. It has mechanical properties similar to ABS while being stronger than it. It is a professional yet budget consumable widely compatible with FDM printers equipped with a heated bed. 

eSUN yellow HIPS can be combined with ABS for printing intricate geometries, overhangs and interior cavities using dissolvable support structures. It features a low warping rate and a low water absorption rate. It allows hands-free removal by dipping the printed models in Limonene. It delivers clean and smooth surfaces. Printing with a PEI build surface will strongly increase the layer adhesion. It comes in a vacuum-packed bag coiled around a 1kg spool.

This yellow lucky cat has been printed using eSUN HIPS. As you can see, the final surface finish is quite glossy.

Specifications

eSUN yellow HIPS technical data

• Printing temperature: 220 - 260 °C
• Heated bed temperature: 90 - 110°C recommended
• Filament density: 1.05 g/cm³ 
• Heat Distortion Temperature (0.45MPa): 80 °C 
• Melt Flow Index: 3 g/10min (800°C/5KG）
• Tensile Strength: 27 MPa
• Elongation at Break: 55%
• Flexural Strength: 39 MPa
• Flexural Modulus: 2,280 MPa
• IZOD Impact Strength: 11 KJ/㎡

Spool specs

• Filament diameter: 3mm (2.85mm)
• Dimensional Accuracy: ±0.05
• Spool weight: 1kg
• Color name: Yellow
• Color attribute: Solid

The eSUN yellow HIPS is supplied in 1kg filament spools. Each spool is vacuum-packed in a desiccant bag for storage and freshness.