Flying Bear P905X 3D Printer

In Stock
Best Enthusiast 3D Printer - Tom’s Guide
  • Large build volume: 220 x 280 x 242 mm
  • An all-metal 3D printer
  • Available with 1 or 2 extruders
  • Supports PLA, ABS and 9 more materials
When purchasing with us you get:
  • FREE Delivery
  • Full 1 Year Warranty
  • 24/5 Customer Support
  • 20% Filament Discount
This 3D printer comes with:
  • A spool of filament
  • Multiple nozzles, choose the optimal size for your next project
  • A 4GB SD card
  • All the necessary tools
Price: $555.00
Order now and we’ll ship it in 24 hours or less

Flying Bear P905X is a 3D printer of the P905 series with an increased build volume of 220 x 280 x 242 mm. The printer can be equipped with one or two extruders, and it works with a wide range of materials.

Look at the picture below!

One maker made this airplane. The model is quite big. How did he do this? He printed the airplane parts and then assembled them together. All the parts were built on the Flyingbear 3D printer.

One maker made this airplane

Another good example is this vase which was found on Thingiverse and then built on the Flyingbear. With its sharp corners, it could fit into almost any interior.

Thingiverse and then built on the Flyingbear



  • Print quality
  • Materials
  • Build volume
  • Printer controls
  • What’s in the box
  • Look and feel
  • Price

Print quality

The Flyingbear P905X is an FDM 3D printer that can print layers at 50 microns. This way you can produce parts with smooth exterior surfaces. Even when you’re looking closer at the model on the picture below, you can see that the surface is quite smooth. 

 surface is quite smooth

The Flyingbear P905X has a 0.2 mm nozzle, allowing for prints with fine detail. Here’s a 3D printed model of an airplane which proves this statement once again. Every line is well-defined, making it a quality print. In fact, you should notice that this is a functioning RC airplane, although field tests showed limited success so far.

model of an airplane which proves this statement once again

The print head runs on rods with linear bearings, making the design more simple, lightweight and effective, all characteristics that are desirable in a 3D printer. Its metal body reduces the likelihood of any play, making printing more precise and reliable.

 metal body reduces the likelihood



Flyingbear P905X prints with PLA, ABS, PETG, Wood, PVA, Flex and other materials. 
The extruder comes with a fan for printing with PLA-type materials. By cooling the model down, it reduces warping, stringing and, generally, makes for higher quality prints.
These white and red dinosaurs made of PLA show the quality the printer is capable of.

 white and red dinosaurs made of PLA

Credit: at.3d.print / Instagram

The Flyingbear P905X has a heated print bed, which makes it suitable for printing with ABS-type materials. Check the picture below! It’s a gun stand for The Makarov pistol. Made of ABS, it does not have much warping, a high quality model.

The Makarov pistol. Made of ABS

To ensure high reproducibility, we recommend installing an enclosed print chamber. This way the print quality would not be affected by temperature fluctuations as a result of drafts and other factors.

installing an enclosed print chambe

The Flyingbear P905X prints with 1.75 mm filament, providing you with a wide choice of materials.

The Flyingbear P905X prints with 1.75 mm filament


Build volume

Build volume

The build area of 8.7 x 11 x 9.5 inches (220 x 280 x 242 mm) lets you print just about anything. You can build even big models such as the gun stand from the ABS example above. Here’s another picture:

build even big models such as the gun stand from the ABS example above


Printer controls

The printer is controlled via the built-in LCD interface. 

The printer is controlled via the built-in LCD interface.

3D models can be printed from computer via Micro SD or USB. 
The printer is compatible with Repetier-host and Cura software and works with 3D models in .STL format. The software is available for Windows, Mac. Linux users will have to use a virtual machine or other software. 

What’s in the box

What’s in the box

  • 4 GB SD Card 
  • 1 Roll Filament
  • Assembly Tools 
  • Small Shovel 
  • Nozzles

For some items package content may change. In case of any questions, please get in touch.


Look and feel

Look and feel

Flyingbear P905X is available in black color. Its stylish look makes it ideal for both home and professional use.
The printer dimensions are 13.3 x 13.6 x 15.2 inches (338 x 345 x 385 mm). It weighs 30.8 lb (14 kg). The spool holder is mounted separately.


The price Flyingbear P905X is $555.00, which is reasonable considering its functionality.

Our mission
Founded in 2013, we have integrated digital manufacturing in over 10,000 businesses. Today we are a team of 80+ 3D printing enthusiasts, geeks and entrepreneurs on a mission to make these technologies accessible to all.
Trusted integrator
In 2018, 3D Print Awards named us the best digital manufacturing integrator. We offer technology and operational consulting to capture growth and achieve excellence in strategy, manufacturing and distribution.
Expert customer service
Deep expertise in 3D printing, 3D scanning, 3D modelling, plastic casting, laser cutting and CNC milling. It comes from delivering 50,000+ projects at our digital manufacturing bureau. We know what we talk about.
Satisfaction guarantee
93% of surveyed customers are satisfied with our customer service. Have a question, concern or feedback for us? Our support team is a quick chat or email away — 5 days a week, Monday to Friday from 9 am to 5 pm.
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now