PhotoCentric Daylight Pro Flexible Resin Amber - 5kg

PhotoCentric Daylight Flexible Resin Amber is an elastic, visible-curing-light polymer. It can be used to produce bendable thin parts or squeezable hollow objects. It gives the model high flexibility and a soft, translucent amber finish. The final prints can be stretched, bent, and compressed without breaking while remaining reasonably hard. They will always return to their original shape.

This photosensitive polymer features high elongation and low tensile strength. It polymerizes when exposed to the visible light spectrum. It has been optimized for printing large parts on the proprietary Liquid Crystal Pro. 

Flexible resin can be washed in both water and soap. You can clean the printed parts by leaving them in a hot tap water bath under direct sunlight for around 10 minutes. Continue reading for a complete review.

Specifications

PhotoCentric Daylight Pro Flexible Resin Amber 

Pro Flexible resin allows producing elastic parts with a good level of rigidity. It features low tensile strength and high elongation at break (60%). It produces accurate, soft objects with a polished surface finish.

Daylight Pro Flexible Resin is available in 5kg bottles with a drip stopper. Due to its light sensitivity, the resin should be always kept away from direct sunlight, both when pouring or storing it. When completing a print, you might reuse the excess liquid after filtering it.

Technical specs

After post-curing a part printed with Daylight Flexible resin, you will get:

• Hardness: 85 Shore A
• Tensile strength: 4.9 MPa (1.5MPa before post-exposure)
• Elongation at break: 60%
• Heat deflection temp: 60°C

Liquid specs:

• Viscosity: 200 cPs (@ 25ºC)
• Storage: 1050°C
• Density: 1.18 g/cm3

Color specs

• Color name: Amber
• Color attribute: Translucent