Ultimaker 2.85mm Black PLA filament - 750g

Ultimaker black PLA is an easy-to-print strong 3D printing filament based on the Polylactic Acid polymer. It is made from renewable resources. This means it is completely biodegradable and environmentally friendly. When printed, it doesn’t produce fumes or emissions being perfect for kids and adults alike. Its ease of printing depends both on its low melting temperature and purity. You can print it either on a cold or heated bed using the FDM 3D printer you prefer. When printed on a heated build plate, the recommended bed temperature is 60°C.

Ultimaker black PLA is really versatile. It can be used to produce a broad range of different models giving you wide design flexibility. It can be printed at high speeds always delivering a good surface quality. It offers good flexural and impact strength. Its purity and precise diameter of 2.85mm let it flow smoothly reducing the risk of clogging caused by impurities or thread deformations. It produces flawless and dimensionally accurate prints with a smooth black finish brilliant in color.

Many makers, designers and engineers use Ultimaker PLA filaments for rapid prototyping, design proofing, investment casting, and more. It is widely adopted for dual extrusion along with PLA, PVA and Breakaway support filaments. Depending on your printing needs, you can choose between a 350g or a 750g spool.

Specifications

Ultimaker black PLA technical data

• Printing temperature: 145 - 160 °C
• Heated bed temperature: Cold bed / 60 °C recommended 
• Filament density: 1.24 g/cm3 
• Melt mass-flow rate: 6.09 g/10 min (210 °C, 2.16 kg)
• Tensile stress at yield: 49.5 MPa (50 mm/min)
• Tensile stress at break: 45.6 MPa (50 mm/min)
• Elongation at yield: 3.3% (50 mm/min)
• Elongation at break: 5.2% (50 mm/min)
• Flexural Strength: 103 MPa
• Flexural Modulus: 3,150 MPa
• IZOD Impact Strength: 5.1 kJ/m2  (at 23 °C)
• Hardness: 83 (Shore D) Durometer 

Spool specs

• Filament diameter: 2.85mm 
• Dimensional Accuracy: ± 0.10 mm
• Spool weight: 750g
• Color name: Black 
• Color attribute: Solid

The Ultimaker black PLA filament is supplied in 750g spools. Each spool is NFC tagged. The NFC chip allows identifying the loaded material immediately. In addition, it provides you with the optimized printing profile of each filament. It also tracks material usage displaying the amount of filament available directly on the printer.