Clearance Sale

Sort by: Popularity Price Low-High Model A-Z
Filters Sort
Clear all
Sort Close
  • -42% Save $5,501 CreatBot D600 Pro V2 (non-HS) Large Format Industrial 3D Printer CreatBot D600 Pro V2 (non-HS) Large Format Industrial 3D Printer $7,499.00 $13,000.00 Only 1 left ★★★★★ 5 (6 Reviews) Build volume 600 x 600 x 600 mm (single extrusion); 540 x 600 x 600 mm (dual extrusion) Technology Fused Deposition Modeling (FDM) View add-ons & extras Add to Cart Make an Offer Industrial 600×600×600 mm 3D printer with an actively heated chamber (70°C) and dual extruders reaching 420°C — prints carbon fiber nylon, polycarbonate, ABS, ASA, and other engineering plastics out of the box. Inspected, re-calibrated, and test-printed at our Atlanta repair center. The cheapest assembled printer in its size class with an active heated chamber — alternatives from Mingda and MAKEiT start at $17K–$25K.
  • -68% Save $1,500 Phrozen Sonic 4K 2022 Resin LCD 3D Printer Phrozen Sonic 4K 2022 Resin LCD 3D Printer $699.00 $2,199.00 Only 1 left ★★★★★ 5 (8 Reviews) Build volume 135 x 75 x 200 mm Min. layer height 10 Microns Technology LCD View add-ons & extras Add to Cart Make an Offer Desktop resin LCD printer with a 4K mono screen (35 µm pixel size), built-in heater, air filtration, and DS Slicer with pre-configured profiles for Phrozen, Keystone, NextDent, Enlighten, Harzlabs, Dreve, Dentona, Detax, Graphy, Whipmix, Vericom, and Saremco dental resins. New LCD screen installed, nFEP film replaced, firmware updated, and verified with functional test prints at our service center.
  • -19% Save $490 Unitree Go2 Air Quadruped Robot Unitree Go2 Air Quadruped Robot $2,100.00 $2,590.00 Only 1 left ★★★★★ 5 (4 Reviews) Max. speed 2.5 m/s View add-ons & extras Add to Cart Make an Offer Smart quadruped robot with 4D LiDAR, HD camera, intelligent obstacle avoidance, and up to 2.5 m/s speed — controlled via app or remote controller. Performs tricks, follows you autonomously, and carries up to 7 kg. Brand new, sealed. Includes remote controller, battery, charger, support stand, and transport case.
  • -72% Save $900 Creality CR-5 Pro High-temp Version 3D Printer Creality CR-5 Pro High-temp Version 3D Printer $349.00 $1,249.00 Only 1 left ★★★★★ 5 (3 Reviews) Build volume 300 x 225 x 380 mm Layer Height 100 micron Technology FDM View add-ons & extras Add to Cart Make an Offer Fully enclosed FDM printer with a 300×225×380 mm build volume, 300°C extruder for nylon, polycarbonate, and carbon fiber composites, BLTouch auto-leveling, and silent TMC2208 drivers. Brand-new, mint condition — sat mislabeled in our warehouse since 2025. Arrives fully assembled with PLA filament, spare nozzles, tools, and an 8 GB memory card.
  • -47% Save $791 FLUX Beamo 30W Laser Cutter & Engraver FLUX Beamo 30W Laser Cutter & Engraver $899.00 $1,690.00 Only 2 left ★★★★★ 5 (5 Reviews) Laser Power 30W View add-ons & extras Add to Cart Make an Offer Compact desktop CO2 laser cutter and engraver with a 300×210 mm work area — cuts wood, acrylic, leather, and fabric up to 5 mm thick and engraves at 1,000 DPI resolution. Built-in camera for live preview and alignment, Wi-Fi/Ethernet connectivity, and Beam Studio software with Adobe Illustrator integration. Professionally repaired after shipping damage; tested and confirmed functional. Compatible with optional Rotary Module and Autofocus add-ons — both also on clearance.
  • -47% Save $700 Creality CR-Scan Raptor 3D Scanner Creality CR-Scan Raptor 3D Scanner $799.00 $1,499.00 Only 2 left ★★★★★ 5 (5 Reviews) Texture / Colors Yes Technology Blue light (blue 7-line laser) / NIR (infrared binocular structured light) View add-ons & extras Add to Cart Make an Offer Hybrid 3D scanner combining 7-line blue laser (0.02 mm accuracy, 60 FPS) and infrared structured light for markerless scanning. Handles objects from small mechanical parts to large automotive components, captures 24-bit full color, and scans black and metal surfaces without spray. Lightweight handheld design (372 g) with one-hand controls and anti-shake stabilization. Brand-new unit.
  • -11% Save $500 FibreSeeker 3 continuous fibre 3D printer FibreSeeker 3: Consumer Continuous Fibre 3D Printer for Carbon Fiber Composite Printing $3,999.00 $4,499.00 Only 5 left Build volume 300 x 300 x 245 mm Layer Height 0.05–0.3 mm Technology CFC + FFF (Composite Fiber Co-extrusion + Fused Filament Fabrication) View add-ons & extras Add to Cart Make an Offer Think Bambu Lab ease of use meets Markforged continuous fiber reinforcement — enclosed CoreXY printer that combines standard FFF with a dual-nozzle CFC system, embedding continuous carbon into PLA, PETG, PC, or nylon parts up to 900 MPa tensile strength. Auto-leveling, smart calibration, live-view camera, heated chamber (65°C), 300×300×245 mm build volume, and FibreSeek Aura slicer for fiber path planning. Brand-new unit with 1-year warranty.
  • -26% Save $351 Modix Active Air Filter Modix Active Air Filter $999.00 $1,350.00 Only 1 left ★★★★★ 5 (4 Reviews) View add-ons & extras Add to Cart Make an Offer External three-phase filtration system for Modix large-format 3D printers — pre-filter, HEPA, and active carbon stages capture dust, sub-micron particles, and toxic fumes from ABS, PETG, and other materials. Adjustable airflow speed, front-panel filter replacement indicator, and continuous air recirculation back into the printer enclosure. Replacement filter sets also available on clearance.
  • -23% Save $271 Phrozen Sonic MEGA 8K S LCD Resin 3D Printer: 43 µm High Resolution LCD Screen, Large Printing Volume & Lift-Up Lid Phrozen Sonic MEGA 8K S LCD Resin 3D Printer: 43 µm High Resolution LCD Screen, Large Printing Volume & Lift-Up Lid $899.00 $1,170.00 Only 1 left ★★★★★ 5 (4 Reviews) Build volume 33 x 18.5 x 30 cm Technology Resin 3D Printer - LCD Type View add-ons & extras Add to Cart Make an Offer The S redesign of the Sonic Mega 8K — same 15-inch 8K mono LCD and 43 µm XY resolution, but trades 100 mm of Z height (300 mm vs 400 mm on V1) for workflow upgrades: ACF release film for lower peel force, lift-up lid with built-in drip hanger, Pump & Fill auto-resin feeding support, and a faster mainboard (up to 600 layers/hr). Factory pre-calibrated. Compatible replacement build plate and nFEP film also on clearance.
  • -40% Save $200 FLUX Rotary Extension Module for Beamo FLUX Rotary Extension Module for Beamo $299.00 $499.00 Only 5 left ★★★★★ 5 (5 Reviews) View add-ons & extras Add to Cart Make an Offer Rotary add-on that replaces the Beamo honeycomb base and spins cylindrical objects under the laser for curved surface engraving — wine bottles, glasses, thermos cups, and pens from 0.8 to 10 cm diameter (with optional extension rod). Tool-free diameter adjustment via top knob. Pairs with the FLUX Beamo 30W, also on clearance.
  • -27% Save $149 Sinterit Powder Separator Sinterit Powder Separator $400.00 $549.00 Only 1 left View add-ons & extras Add to Cart Make an Offer Cyclone-type separator for the Sinterit ATEX Vacuum Cleaner — recovers reusable SLS powder from fine dust in about 10 minutes, depositing clean material into a 12-liter metal container ready for sieving and reuse. Antistatic design with grounding wire. Compatible with Sinterit Lisa, Lisa Pro, Lisa X, and Nils 480 printers.
  • -23% Save $120 Anisoprint CCF (Composite Carbon Fiber) 1.5K 750 m Anisoprint CCF (Composite Carbon Fiber) 1.5K 750 m $400.00 $520.00 Only 4 left View add-ons & extras Add to Cart Make an Offer Continuous carbon fiber tow (1.5K, 0.35 mm diameter, 750 m spool) for Anisoprint CFC composite co-extrusion technology. Pre-impregnated for optimal adhesion with PLA, PETG, ABS, PC, or nylon matrix. Tensile strength 2,130 MPa, elastic modulus 135 GPa — produces parts stronger and lighter than aluminum equivalents.
  • -33% Save $100 FLUX Beamo Autofocus FLUX Beamo Autofocus $199.00 $299.00 Only 2 left ★★★★★ 5 (2 Reviews) View add-ons & extras Add to Cart Make an Offer Autofocus module for the FLUX Beamo that automatically detects material thickness and adjusts laser focus — eliminates manual focusing errors. Enables Z Step multi-pass cutting for thicker materials by automatically lowering the laser head between passes. Two modes: manual probe (double-tap button) and Beam Studio software control. Pairs with the FLUX Beamo 30W, also on clearance.
  • -24% Save $93 Modix Griffin High-Flow Hotend Modix Griffin High-Flow Hotend $299.00 $392.00 Only 1 left View add-ons & extras Add to Cart Make an Offer High-flow hotend upgrade for Modix large-format printers — 80W heater, PT-1000 thermistor, and 1 mm nozzle for dramatically higher volumetric throughput on big prints. Faster print times on large-format builds without sacrificing quality. Drop-in replacement for the standard Modix hotend.
  • -22% Save $71 Modix Replacement Air Filters Modix Replacement Air Filters $249.00 $320.00 Only 1 left View add-ons & extras Add to Cart Make an Offer Replacement filter set for the Modix Active Air Filter — includes 5 pre-filters (3–6 month lifespan) and 1 HEPA/carbon combo filter (6–12 months) for complete dust, particle, and fume removal. Front-panel indicator on the MAAF unit alerts when replacement is due. Modix Active Air Filter also on clearance.
  • -33% Save $50 Modix Casters Add-on Modix Casters Add-on $100.00 $150.00 Only 1 left View add-ons & extras Add to Cart Make an Offer Set of 4 heavy-duty casters with adjustable leveling for Modix large-format printers. Makes your printer mobile around the workshop while maintaining balance and reducing vibrations during printing. Mounts directly to the Modix printer frame.
  • -31% Save $45 Anisoprint Smooth PA 1.75 mm 750 cc Anisoprint Smooth PA 1.75 mm 750 cc $100.00 $145.00 Only 5 left View add-ons & extras Add to Cart Make an Offer Carbon fiber-filled nylon filament by Polymaker, engineered for Anisoprint Composer A3 and A4 printers. Low moisture absorption — prints without an active dryer. 71.8 MPa tensile strength, 131°C heat deflection, and smooth surface finish. Designed as the outer-perimeter matrix material for CFC composite printing alongside Anisoprint CCF reinforcement fiber (also on clearance).
  • -27% Save $36 Phrozen Building Platform for Sonic Mega 8K (15 inch) Phrozen Building Platform for Sonic Mega 8K (15 inch) $99.00 $135.00 Only 3 left View add-ons & extras Add to Cart Make an Offer Replacement 15-inch aluminum build plate for the Phrozen Sonic Mega 8K and 8K S. 4-point leveling system with one-click software calibration — ready to print in minutes. Warp-free aluminum construction. Keep a spare on hand to swap between prints and maximize uptime.
  • -54% Save $35 Sinterit Abrasive Material for Sandblaster Sinterit Abrasive Material for Sandblaster $29.99 $65.00 Only 2 left View add-ons & extras Add to Cart Make an Offer Dry glass bead blasting medium (~200 µm granulation, 4 kg / 2.5 L) for the Sinterit Sandblaster and Sandblaster XL. Removes un-sintered SLS powder residues, smooths surfaces, and highlights fine details without damaging delicate geometries. No chemicals or solvents required.
  • -46% Save $27 Phrozen PFA (nFEP) Film, A3 Size, 450x280mm Phrozen PFA (nFEP) Film, A3 Size, 450x280mm $31.99 $59.11 In Stock ★★★★★ 5 (6 Reviews) View add-ons & extras Add to Cart Make an Offer Replacement PFA (nFEP) release film for the Phrozen Sonic Mega 8K and 8K S vat. Smoother release than standard FEP — lower peel force, fewer print failures, and longer service life. Pre-cut A3 sheet (450×280 mm) with high optical clarity for consistent UV curing. Stock up at nearly half price.

Why are these prices so low? These are brand-new and open-box units from overstock and discontinued lines — not defective products. We overbought to ensure availability, and now we're passing the savings to you.

Returns & warranty: All clearance items are sold as Final Sale — no returns or exchanges. Open-box items are clearly marked. Manufacturer warranty applies where stated on the product page.

Questions? Our support team is available Mon–Fri, 8 AM – 4 PM PST at +1 (888) 871-17-51 or sales@top3dshop.com.

Our mission
Founded in 2013, we have integrated digital manufacturing in over 10,000 businesses. Today we are a team of 80+ 3D printing enthusiasts, geeks and entrepreneurs on a mission to make these technologies accessible to all.
Trusted integrator
In 2018, 3D Print Awards named us the best digital manufacturing integrator. We offer technology and operational consulting to capture growth and achieve excellence in strategy, manufacturing and distribution.
Expert customer service
Deep expertise in 3D printing, 3D scanning, 3D modelling, plastic casting, laser cutting and CNC milling. It comes from delivering 5,000+ projects at our digital manufacturing bureau. We know what we talk about.
Fast response time
93% of surveyed customers are satisfied with our customer service. Have a question, concern or feedback for us? Our support team is a quick chat or email away — 5 days a week, Monday to Friday from 8 am to 4 pm PST.